Chapter 14:Ocean Energy

Chapter 14: Ocean Energy

The world's ocean may eventually provide us with energy to power our homes and businesses. Right now, there are very few ocean energy power plants and most are fairly small. But how can we get energy from the ocean?

There are three basic ways to tap the ocean for its energy. We can use the ocean's waves, we can use the ocean's high and low tides, or we can use temperature differences in the water. Let's take a look at each.

 Wave Energy

Kinetic energy (movement) exists in the moving waves of the ocean. That energy can be used to power a turbine. In this simple example, to the right, the wave rises into a chamber. The rising water forces the air out of the chamber. The moving air spins a turbine which can turn a generator.

When the wave goes down, air flows through the turbine and back into the chamber through doors that are normally closed.

This is only one type of wave-energy system. Others actually use the up and down motion of the wave to power a piston that moves up and down inside a cylinder. That piston can also turn a generator.

Most wave-energy systems are very small. But, they can be used to power a warning buoy or a small light house.

 Tidal Energy

Another form of ocean energy is called tidal energy. When tides comes into the shore, they can be trapped in reservoirs behind dams. Then when the tide drops, the water behind the dam can be let out just like in a regular hydroelectric power plant.

Tidal energy has been used since about the 11th Century, when small dams were built along ocean estuaries and small streams. the tidal water behind these dams was used to turn water wheels to mill grains.

In order for tidal energy to work well, you need large increases in tides. An increase of at least 16 feet between low tide to high tide is needed. There are only a few places where this tide change occurs around the earth. Some power plants are already operating using this idea. One plant in France makes enough energy from tides (240 megawatts) to power 240,000 homes.

This facility is called the La Rance Station in France. It began making electricity in 1966. It produces about one fifth of a regular nuclear or coal-fired power plant. It is more than 10 times the power of the next largest tidal station in the world, the 17 megawatt Canadian Annapolis station.

 Ocean Thermal Energy Conversion (OTEC)

The idea is not new. Using the temperature of water to make energy actually dates back to 1881 when a French Engineer by the name of Jacques D'Arsonval first thought of OTEC. The final ocean energy idea uses temperature differences in the ocean. If you ever went swimming in the ocean and dove deep below the surface, you would have noticed that the water gets colder the deeper you go. It's warmer on the surface because sunlight warms the water. But below the surface, the ocean gets very cold. That's why scuba divers wear wet suits when they dive down deep. Their wet suits trapped their body heat to keep them warm.

Almost everywhere across the entire planet, the upper 10 feet below ground level stays the same temperature, between 50 and 60 degrees Fahrenheit (10 and 16 degrees C). If you've ever been in a basement of a building or in a cavern below ground, the temperature of the area is almost always cool.

Power plants can be built that use this difference in temperature to make energy. A difference of at least 38 degrees Fahrenheit is needed between the warmer surface water and the colder deep ocean water.

Using this type of energy source is called Ocean Thermal Energy Conversion or OTEC. It is being demonstrated in Hawaii. More info on OTEC can be found on the archive pages for the Natural Energy Laboratory of Hawaii at:www.hawaii.gov/dbedt/ert/otec-nelha/otec.html

Next chapter is about Solar Energy.

Chapter 13:Nuclear Energy - Fission and Fusion

Chapter 13: Nuclear Energy – Fission and Fusion

Another major form of energy is nuclear energy, the energy that is trapped inside each atom. One of the laws of the universe is that matter and energy can't be created nor destroyed. But they can be changed in form.

Matter can be changed into energy. The world's most famous scientist, Albert Einstein, created the mathematical formula that explains this. It is:

This equation says: 

E [energy] equals m [mass] times c² [c stands for the velocity or the speed of light. c² means c times c, or the speed of light raised to the second power — or c-squared.]

You can listen to Einstein's voice explaining this at:
www.aip.org/history/einstein/voice1.htm

Please note that some web browser software may not show an exponent (raising something to a power, a mathematical expression) on the Internet. Normally c-squared is shown with a smaller "2" placed above and to the right of the c.

Scientists used Einstein's famous equation as the key to unlock atomic energy and also create atomic bombs.

The ancient Greeks said the smallest part of nature is an atom. But they did not know 2,000 years ago about nature's even smaller parts.

As we learned in chapter 2, atoms are made up of smaller particles -- a nucleus of protons and neutrons, surrounded by electrons which swirl around the nucleus much like the earth revolves around the sun.

 Nuclear Fission

An atom's nucleus can be split apart. When this is done, a tremendous amount of energy is released. The energy is both heat and light energy. Einstein said that a very small amount of matter contains a very LARGE amount of energy. This energy, when let out slowly, can be harnessed to generate electricity. When it is let out all at once, it can make a tremendous explosion in an atomic bomb.

A nuclear power plant (like Diablo Canyon Nuclear Plant shown on the right) uses uranium as a "fuel." Uranium is an element that is dug out of the ground many places around the world. It is processed into tiny pellets that are loaded into very long rods that are put into the power plant's reactor.

The word fission means to split apart. Inside the reactor of an atomic power plant, uranium atoms are split apart in a controlled chain reaction.

In a chain reaction, particles released by the splitting of the atom go off and strike other uranium atoms splitting those. Those particles given off split still other atoms in a chain reaction. In nuclear power plants, control rods are used to keep the splitting regulated so it doesn't go too fast.

If the reaction is not controlled, you could have an atomic bomb. But in atomic bombs, almost pure pieces of the element Uranium-235 or Plutonium, of a precise mass and shape, must be brought together and held together, with great force. These conditions are not present in a nuclear reactor.

The reaction also creates radioactive material. This material could hurt people if released, so it is kept in a solid form. The very strong concrete dome in the picture is designed to keep this material inside if an accident happens.

This chain reaction gives off heat energy. This heat energy is used to boil water in the core of the reactor. So, instead of burning a fuel, nuclear power plants use the chain reaction of atoms splitting to change the energy of atoms into heat energy.

Power plant drawing courtesy Nuclear Institute

This water from around the nuclear core is sent to another section of the power plant. Here, in the heat exchanger, it heats another set of pipes filled with water to make steam. The steam in this second set of pipes turns a turbine to generate electricity. Below is a cross section of the inside of a typical nuclear power plant.

 Nuclear Fusion

Another form of nuclear energy is called fusion. Fusion means joining smaller nuclei (the plural of nucleus) to make a larger nucleus. The sun uses nuclear fusion of hydrogen atoms into helium atoms. This gives off heat and light and other radiation.

In the picture to the right, two types of hydrogen atoms, deuterium and tritium, combine to make a helium atom and an extra particle called a neutron.

Also given off in this fusion reaction is energy! Thanks to the University of California, Berkeley for the picture.

Scientists have been working on controlling nuclear fusion for a long time, trying to make a fusion reactor to produce electricity. But they have been having trouble learning how to control the reaction in a contained space.

What's better about nuclear fusion is that it creates less radioactive material than fission, and its supply of fuel can last longer than the sun.

Read about Ocean Energy in the next chapter.

Chapter 12:Hydro Power

Chapter 12: Hydro Power

When it rains in hills and mountains, the water becomes streams and rivers that run down to the ocean. The moving or falling water can be used to do work. Energy, you'll remember is the ability to do work. So moving water, which has kinetic energy, can be used to make electricity.

For hundreds of years, moving water was used to turn wooden wheels that were attached to grinding wheels to grind (or mill) flour or corn. These were called grist mills or water mills.

In the year 1086, the Domesday Book was written. The multi-volume books are very large. Hand-written on the pages of the books are lists of all properties, homes, stores and other things in England. The Domesday Book listed 5,624 waterwheel-driven mills in England south of the Trent River. That was about one mill for each 400 people.

Water can either go over the top of the wheel like in the photograph on the left, or the wheel can be placed in the moving river. The flow of the river then turns the wheel at the bottom like in the moving graphic on the right.

Today, moving water can also be used to make electricity.

Hydro means water. Hydro-electric means making electricity from water power.

Hydroelectric power uses the kinetic energy of moving water to make electricity. Dams can be built to stop the flow of a river. Water behind a dam often forms a reservoir Like the picture of Shasta Dam in Northern California pictured on the right. Dams are also built across larger rivers but no reservoir is made. The river is simply sent through a hydroelectric power plant or powerhouse. You can see this in the picture of The Dalles Dam on the Columbia River along the border of Oregon and Washington State.

Hydro is one of the largest producers of electricity in the United States. Water power supplies about 10 percent of the entire electricity that we use. In states with high mountains and lots of rivers, even more electricity if made by hydro power. In California, for example, about 15 percent of all the electricity comes from hydroelectric.

The state of Washington leads the nation in hydroelectricity. The Grand Coulee, Chief Joseph and John Day dams are three of six major dams on the Columbia River. About 87 percent of the electricity made in Washington state is produced by hydroelectric facilities. Some of that electricity is exported from the state and used in other states.

 How a Hydro Dam Works

The water behind the dam flows through the intake and into a pipe called a penstock. The water pushes against blades in a turbine, causing them to turn. The turbine is similar to the kind used in a power plant that we learned about in Chapter 6. But instead of using steam to turn the turbine, water is used.

The turbine spins a generator to produce electricity. The electricity can then travel over long distance electric lines to your home, to your school, to factories and businesses.

Hydro power today can be found in the mountainous areas of states where there are lakes and reservoirs and along rivers.

In the next chapter we will talk about Nuclear Energy - Fission and Fusion.

Science of Electricity Basics

Science of Electricity Basics

Everything Is Made of Atoms

In order to understand electricity, we need to know something about atoms. Everything in the universe is made of atoms — every star, every tree, every animal. The human body is made of atoms. Air and water are, too. Atoms are the building blocks of the universe. Atoms are so small that millions of them would fit on the head of a pin.

Atoms Are Made of Even Smaller Particles

The center of an atom is called the nucleus. It is made of particles called protons and neutrons. The protons and neutrons are very small, but electrons are much, much smaller. Electrons spin around the nucleus in shells a great distance from the nucleus. If the nucleus were the size of a tennis ball, the atom would be the size of the Empire State Building. Atoms are mostly empty space.

If you could see an atom, it would look a little like a tiny center of balls surrounded by giant invisible bubbles (or shells). The electrons would be on the surface of the bubbles, constantly spinning and moving to stay as far away from each other as possible. Electrons are held in their shells by an electrical force.

The protons and electrons of an atom are attracted to each other. They both carry anelectrical charge. Protons have a positive charge (+) and electrons have a negative charge (-). The positive charge of the protons is equal to the negative charge of the electrons. Opposite charges attract each other. An atom is in balance when it has an equal number of protons and electrons. The neutrons carry no charge and their number can vary.

The number of protons in an atom determines the kind of atom, or element, it is. An element is a substance consisting of one type of atom (the Periodic Table shows all the known elements), all with the same number of protons. Every atom of hydrogen, for example, has one proton, and every atom of carbon has six protons. The number of protons determines which element it is.

Electricity Is the Movement of Electrons Between Atoms

Electrons usually remain a constant distance from the nucleus in precise shells. The shell closest to the nucleus can hold two electrons. The next shell can hold up to eight. The outer shells can hold even more. Some atoms with many protons can have as many as seven shells with electrons in them.

The electrons in the shells closest to the nucleus have a strong force of attraction to the protons. Sometimes, the electrons in an atom's outermost shells do not. These electrons can be pushed out of their orbits. Applying a force can make them move from one atom to another. These moving electrons are electricity.

Static Electricity Exists in Nature

Lightning is a form of electricity. It is electrons moving from one cloud to another or jumping from a cloud to the ground. Have you ever felt a shock when you touched an object after walking across a carpet? A stream of electrons jumped to you from that object. This is called static electricity.

Have you ever made your hair stand straight up by rubbing a balloon on it? If so, you rubbed some electrons off the balloon. The electrons moved into your hair from the balloon. They tried to get far away from each other by moving to the ends of your hair. They pushed against each other and made your hair move — they repelled each other. Just as opposite charges attract each other, like charges repel each other.

Magnets and Electricity

Magnetic Field Around a Bar Magnet

Source: National Energy Education Development Project (Public Domain)

The spinning of the electrons around the nucleus of an atom creates a tiny magnetic field. Most objects are not magnetic because their electrons spin in different, random directions, and cancel out each other.

Magnets are different; the molecules in magnets are arranged so that their electrons spin in the same direction. This arrangement of atoms creates two poles in a magnet, a North-seeking pole and a South-seeking pole.

Magnets Have Magnetic Fields

The magnetic force in a magnet flows from the North pole to the South pole. This creates amagnetic field around a magnet.

Have you ever held two magnets close to each other? They don't act like most objects. If you try to push the South poles together, they repel each other. Two North poles also repel each other.

Turn one magnet around, and the North (N) and the South (S) poles are attracted to each other. Just like protons and electrons — opposites attract.

Magnetic Fields Can Be Used To Make Electricity

Properties of magnets can be used to make electricity. Moving magnetic fields can pull and push electrons. Metals such as copper have electrons that are loosely held. So electrons in copper wires can easily be pushed from their shells by moving magnets.

By using moving magnets and copper wire together, electric generators create electricity. Electric generators essentially convert kinetic energy (the energy of motion) into electrical energy.

Batteries, Circuits, & Transformers

Batteries Produce Electricity

Source: National Energy Education Development Project (Public Domain)

A battery produces electricity using two different metals in a chemical solution. A chemical reaction between the metals and the chemicals frees more electrons in one metal than in the other. One end of the battery is attached to one of the metals; the other end is attached to the other metal.

The end that frees more electrons develops a positive charge and the other end develops a negative charge. If a wire is attached from one end of the battery to the other, electrons flow through the wire to balance the electrical charge.

A load is a device that does work or performs a job. If a load –– such as a light bulb –– is placed along the wire, the electricity can do work as it flows through the wire. Electrons flow from the negative end of the battery through the wire to the light bulb. The electricity flows through the wire in the light bulb and back to the positive end of the battery.

Electricity Travels in Circuits

Electricity travels in closed loops, or circuits. It must have a complete path before the electrons can move. If a circuit is open, the electrons cannot flow. When we flip on a light switch, we close a circuit. The electricity flows from an electric wire, through the light bulb, and back out another wire.

When we flip the switch off, we open the circuit. No electricity flows to the light. When we turn a light switch on, electricity flows through a tiny wire in the bulb. The wire gets very hot. It makes the gas in the bulb glow. When the bulb burns out, the tiny wire has broken. The path through the bulb is gone.

When we turn on the TV, electricity flows through wires inside the TV set, producing pictures and sound. Sometimes electricity runs motors — in washers or mixers. Electricity does a lot of work for us many times each day.

Source: National Energy Education Development Project (Public Domain)

Transformers Help To Move Electricity Efficiently Over Long Distances

To solve the problem of sending electricity over long distances, William Stanley developed a device called a transformer. The transformer allowed electricity to be efficiently transmitted over long distances. This increased delivery range made it possible to supply electricity to homes and businesses located far from the electric generating plant.

The electricity produced by a generator travels along cables to a transformer, which changes electricity from low voltage to high voltage. Electricity can be moved long distances more efficiently using high voltage. Transmission lines are used to carry the electricity to a substation. Substations have transformers that change the high voltage electricity into lower voltage electricity. From the substation, distribution lines carry the electricity to homes, offices, and factories, which require low voltage electricity.

Measuring Electricity

Electricity Is Measured in Watts and Kilowatts

A Residential Electricity Meter

Source: Stock photography (copyrighted)

Electricity is measured in units of power called watts. It was named to honor James Watt, the inventor of the steam engine. One watt is a very small amount of power. It would require nearly 750 watts to equal one horsepower.

A kilowatt is the same as 1,000 watts.

Electricity Use Over Time Is Measured in Kilowatthours

A kilowatthour (kWh) is equal to the energy of 1,000 watts working for one hour. The amount of electricity a power plant generates or a customer uses over a period of time is measured in kilowatthours (kWh). Kilowatthours are determined by multiplying the number of kilowatts required by the number of hours of use.

For example, if you use a 40-watt light bulb for 5 hours, you have used 200 watthours, or 0.2 kilowatthours, of electrical energy. See EIA's Energy Calculator section to learn more about converting units.

How Electricity is Generated

How Electricity Is Generated

Turbine Generator

Source: adapted from Energy For Keeps (Public Domain)

A generator is a device that converts mechanical energy into electrical energy.  The process is based on the relationship between magnetism and electricity.  In 1831, scientist Michael Faraday discovered that when a magnet is moved inside a coil of wire, electrical current flows in the wire. 

A typical generator at a power plant uses an electromagnet — a magnet produced by electricity — not a traditional magnet. The generator has a series of insulated coils of wire that form a stationary cylinder.  This cylinder surrounds a rotary electromagnetic shaft.  When the electromagnetic shaft rotates, it induces a small electric current in each section of the wire coil.   Each section of the wire becomes a small, separate electric conductor. The small currents of individual sections are added together to form one large current. This current is the electric power that is transmitted from the power company to the consumer.

An electric utility power station uses either a turbine, engine, water wheel, or other similar machine to drive an electric generator — a device that converts mechanical or chemical energy to electricity. Steam turbines, internal-combustion engines, gas combustion turbines, water turbines, and wind turbines are the most common methods to generate electricity. 

Steam turbine power plants powered by coal and nuclear energy produce about 70% of the electricity used in the United States. These plants are about 35% efficient. That means that for every 100 units of primary heat energy that go into a plant, only 35 units are converted to useable electrical energy.